DNV A steel plate for shipbuilding, DNV A steel sheet Packing

DNV A steel plate for shipbuilding with high strength,good toughness low temperature impact, excellent weldability characteristics,is a kind of high strength ship’s hull structure plate. DNV A steel sheet is a kind of hot rolled general tensile strength steel. DNV steels come 4 grades in ordinary-strength steel for shipbuilding and grade A is the lowest one of them.

DNV A steel sheet is almost exclusively used in the Shipbuilding Industry for the construction of structural parts of ships, barges and marine equipment. DNV A Shipbuilding steel plate also can be used for ship repairing, the offshore oil drilling platform, the platform pipe joints and other components.

DNV A steel plate for shipbuilding Chemical composition(%)

C≤0.21 Si≤0.50 Mn≥2.5C P≤0.035 S≤0.035 Cu≤0.35 Ni≤0.30

CE: C+1/6Mn≤0.40%

DNV A steel sheet Mechanical property

Yield strength Min Mpa:235 Tensile strength Mpa:400-520 Elongation %:22

Charpy V Impact Test:+20,Energy1 24J 27J, Energy2 34J 41J

DNV A steel plate Specification

Thickness: 3-200mm

Width: 1220-4200mm

Length:5000-18000mm

DNV A Steel Packing:

DNV A Steel Packing is normally wrapped by plastic film and waterproof paper, and then fastened on wooden pallet or as you request.

Tests:HIC, PWHT, Crack Detection, Hardness and DWTT test for pipelines steel plates are also available.

DNV A steel plates were primly dealed in the Bebon International.We are offer to the highest quality and service of DNV A shipbuilding steel plate.If you have requirements for DNV A steel,pls contact us freely.