
It is inevitable that there will be different problems in the production process of the steel plate. What defects may appear on 16Mo3 steel plate?(1) Layered. L

16Mo3 is named according to the content of C (carbon) and Mo (molybdenum), which means that the carbon content of this steel plate is about 0.16%, and the conte

A537 steel plate is heat-treated carbon-magnesium-silicon container plate, which implements ASTM standards. There are three grades of A537 steel plate, namely A

To identify the quality of ABS grade AH36 steel, there are several factors to consider. Firstly, check that the material meets the chemical composition and mech

The price of ABS AH36 plate can vary depending on several factors such as the thickness, width, and length of the plate, as well as the quantity being ordered.

AH36 grade steel is a high-strength, low-alloy structural steel with excellent corrosion resistance, toughness, and weldability. It is know as high strength hul

ASTM A131 is a specification for structural steel plates used primarily in shipbuilding. The standard covers various grades of carbon steel and low-alloy steel

Q235B steel is ordinary carbon steel, and Q245R steel is alloy container steel, Both are steel grades named after the yield strength value.The yield strength of

Q245R steel plate belongs to steel plate for boiler and pressure vessels, and the implementation standard is GB713-2014. Q245R steel plate itself not only has v

Q245R steel is mainly used to manufacture equipment such as force vessels and boilers. This process can improve the strength and toughness of Q245R steel, so th

A516 boiler vessel plate is divided into four grades: 55, 60, 65 and 70, and each grade has different tensile force. Its main use is to manufacture gas pressure

Recently, some customers asked if the A516 Gr70 steel can be replaced by the Q345R steel? We compare these two products as follows, hoping to help more people w

A516 Gr70 steel plate is a carbon steel plate for medium and low temperature pressure vessels, which can meet the needs of oil and gas with high sulfur and hydr

National standard canceled the Q345 steel grade and changed it to Q355 from February 1, 2019, which corresponds to the European standard S355. In fact, there is

The main factors of affecting non-metallic inclusions in SS400 molten steel are: the process control of smelting process and the quality of original paving mate

Among the many factors of affecting the non-metallic inclusions in SS400 molten steel, the weak stirring of SS400 molten steel and the sedation time of SS400 mo

SA283 GrC carbon structural steel introduction:
SA283 GrC steel plate belongs to medium and low strength carbon steel plates.SA283 GrC carbon steel delivery sta

S235JR S235J0 S235J2, all of these grades belong to the European standard carbon steel, and follow the European standard EN10025-2. The thickness that can be pr

In the SS400 steel welding process, the original austenite grains around the weld grow abnormally by the thermal cycle, leading to poor weld quality. However, i

Non-metallic inclusions exist in SS400 steel as an independent phase, which destroys the continuity of the steel matrix, increases the inhomogeneity of the SS40

What should we do when the SS400 steel plate is rusted? Don't worry, there are three treatments to choose from: pickling, shot blasting and polishing.Pickli

With the improvement of quality requirements for rolled products, and the application of new technologies and equipment, it could be changed in every step of ro

A36 steel has a higher carbon content than low-carbon steel, and it is considered as low-alloy steel. It is not advisable to directly heat-treat A36 steel, beca

There is almost no difference among ASTM-A36, Q235B, and SS400 On the surface, and they have many similarities in chemical composition and mechanical properties

In order to produce high-quality A573 Gr70 steel, every step has strict requirements. Let's briefly understand the production process of A573 Gr70 steel and