SPCD, SPCE steel sheets and strips with good drawing quality

SPCD, SPCE steel sheets and strips are carbon steel sheets and strips. Compared with SPCD steel sheets and strips, SPCE steel sheets and strips own a deeper drawing quality. Moreover, both SPCD steel sheets and strips and SPCE steel sheets and strips possess wonderful elongations.

Standard: JIS G3141
Related grades: SPCC, SPCD, SPCE, SPCF, SPCG.
Surface finish: Dull finish, bright finish
Temper grade : standard temper grade
Certificate: ISO 6892

Chemical compositions% for SPCD, SPCE steel sheets and strips with good drawing quality

Grade	C	Mn	P	S
SPCD	0.12max.	0.05 max	0.040 max.	0.040 max.
SPCE	0.10 max.	0.45 max.	0.030 max.	0.030 max.

Mechanical properties for SPCD, SPCE steel sheets and strips with good drawing quality
Yield point or proof stress N/mm2 240 max.(SPCD); 220 max.(SPCE)
Tensile strength N/mm2 210 min.
Elongation % for SPCD, SPCE steel sheets and strips with good drawing quality

Grade	Division according to nominal thickness(mm)
SPCD	0.25-0.30	0.30-0.40	0.40-0.60	0.60-1.0	1.0-1.6	1.6-2.0	2.5 or over
SPCD	30 min.	33 min	36 min.	38 min.	39 min.	40 min.	41 min.
SPCE	0.25-0.30	0.30-0.40	0.40-0.60	0.60-1.0	1.0-1.6	1.6-2.0	2.5 or over
SPCE	32 min.	35 min.	38 min.	40 min.	41 min.	42 min.	43 min

Marking(According to the agreement between the purchaser and the supplier):
Dimensions
Classification symbol
Symbol of temper grade
Symbol of surface finish
Number of sheets or mass
Manufacturer's name or its identifying brand
Manufacture number and inspection number

Bendability for SPCD, SPCE steel sheets and strips with good drawing quality
In this case, the test piece shall withstand being bent without cracking on the outside surface of the bent portion.

Camber for SPCD, SPCE steel sheets and strips with good drawing quality
The camber values specified shall not apply to the irregular parts of steel coils. The measurement of the camber shall be conducted only when requested by the purchaser.