- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
RINA E690, RI E690-Z35 steel plate usage<
RINA E690, RI E690-Z35 steel plate usage<
RINA E690, RI E690-Z35 steel Allowable Tolerance:
The tolerance of thickness: -0.3~+3.0mm
The tolerance of width: 0~+20.0mm
The tolerance of length: 0~+50.0mm
The straightness requirements: longitudinal≤3mm/m, Full length≤6mm, Full length distortion≤4mm; Crosswise≤2mm/m and ≤4mm/2m, Full width≤4mm.
RINA E690, RI E690-Z35 steel technology conditions apply to RI E690-Z35 quenched and tempered steel plate which thickness is 152.4mm.
RINA E690 steel Chemical composition:
C |
Si |
Mn |
P |
S |
Ni |
Cr |
Mo |
Nb |
V |
Ti |
B |
Al |
Ceq |
0.14 |
0.15 |
0.95 |
≤0.020 |
≤0.005 |
1.2 |
1 |
0.4 |
0.015 |
0.03 |
0.007 |
≤0.005 |
0.02 |
≤0.78 |
0.18 |
0.35 |
1.3 |
1.5 |
1.5 |
0.6 |
0.05 |
0.08 |
0.05 |
0.06 |
Note: Ceq(%)=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
RINA E690 steel Mechanical properties:
Size |
Tensile Test |
Impact Test |
Hardness |
Z Reduction |
||||||
(T/4) HB |
of Area |
|||||||||
Direction |
Yield |
Tensile |
Elongation |
Reduction |
Site |
Celsius |
Value |
(T/4) % |
||
Mpa |
Mpa |
A5,% |
of Area |
℃ |
J |
|||||
152.4 |
Transverse |
≥690 |
770-940 |
≥14 |
≥50 |
T/4 |
-40 |
≥46 |
235-293 |
≥35 |
Technical requirements:
Smelting process: The steel is fine grain calm steel by electric furnace +LF/VD
Delivery condition: quenched and tempered