Contact us
- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
Products- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
EN10025-2 S235J2 carbon alloy steel plate
EN10025-2 S235J2 carbon alloy steel plate
EN 10025-2 S235J2 Size:
Thickness: 2mm-650mm
Width: 1200mm-4200mm
Length: 3000mm-18000mm
Surface Treatment: Shot blasting and painting or coated
S235J2 steels are both done low temperature impact test at minus 20 degrees.
EN10025-2 S235J2 steel is equal to our Chinese standard steel grade Q235D.
S235J2 Chemical Composition (max %):
|
Grade |
C% |
Si % |
Mn % |
P % |
S % |
N % |
Cu % |
|
S235J2 |
0.19 |
- |
1.50 |
0.035 |
0.035 |
- |
0.60 |
S235J2 Mechanical Properties.
|
Grade |
Thickness (mm) |
Min Yield (Mpa) |
Tensile (Mpa) |
Elongation (%) |
Min Impact Energy |
|
|
S235J2 |
8mm-100mm |
215Mpa-235Mpa |
360-510Mpa |
22-24% |
-20 |
27J |
|
101mm-200mm |
185-195Mpa |
350-490Mpa |
21% |
-20 |
27J |
|
|
201mm-400mm |
165-175Mpa |
330-480 |
21% |
-20 |
27J |
|
|
The min impact energy is longitudinal energy |
||||||
EN10025-2 S235J2 steel plate is mainly used in structural projects and tanks, sometimes S235J2 would be used to construction container which can bear low temperature sea water.