Contact us
- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
Products- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
News- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
EN 10025 S355J0 steel Chinese supplier
EN 10025 S355J0 steel Chinese supplier
EN10025 S355J0 steel has good ductility, toughness, weldability, cold stamping performance and a certain strength, good cold bending properties. But EN10025 S355J0 with poor properties lies in low temperature (impact test is in 20 ℃.). EN10025 S355J0 is widely used for parts and welded structure in general requirements. Discontinuity, such as bar, rod, pin, shaft, screw, nut, ring, bracket, base, building structures, bridges, etc.
EN 10025 S355J0 steel equivalent grades
Germany DIN,WNr |
France AFNOR |
England BS |
Spain UNE |
Italy UNI |
Norway |
St52-3N |
E36-3 |
50C |
AE355C |
Fe510C |
NS12153 |
EN 10025 S355J0 steel chemical composition %
|
C |
Si |
Mn |
N |
P |
S |
Cu |
|
max 0.24 |
0.60 |
1.70 |
0.014 |
Max 0.045 |
Max 0.045 |
0.60 |
EN 10025 S355J0 steel mechanical properties:
|
Grade |
Thickness(mm) |
MinYield(Mpa) |
Tensile(MPa) |
Elongation(%) |
Min Impact Energy |
|
|
S355J0 |
8mm-100mm |
315Map-355Mpa |
450-630Mpa |
18-20% |
0 |
27J |
|
101mm-200mm |
285Mpa-295Mpa |
450-600Mpa |
18% |
0 |
27J |
|
|
201mm-400mm |
275Mpa |
|
17% |
0 |
27J |
|
|
The min impact energy is longitudinal energy |
||||||
If you have any requires,please contact us!