Contact us
- : 0086-371-86151627 0086-371-86151827
- : 0086-371-86011881
- : [email protected]
- : [email protected]
- : bebonchina
Products- Boiler steels
- High carbon steel
- High Yield steel
- steel for welded tubes
- General construction steel
- steel with Cr.,Mo.,Cr-Mo
- Steel for large diameter pipes
- Simple pressure vessels steel
- Steel for gas cylinders and gas vessels
- General purpose structural steels
- Steel for boilers and pressure vessels
- steel resistant to atmospherical corrosion
- Carbon steel and low alloy steel
- Fine-grain structural steels,normalised rolled
- weldable normalized fine grained pressure vessel steels
News- Rolling points of HP265 Steel
- Causes of Wrinkles on the Surface of
- Advantages of Controlled Rolling for
- The difference between A283 Gr C and
- Quality inspection of plate A285 gra
- A285 Gr.C plate for storage tanks
- The processing Technology of NM400 S
- Possible defects of 16Mo3 steel plat
- Acceptance criteria of Surface for 1
- Heat Treatment and Applications of A
China TB/T 1979 09CuPCrNi-A corrosion resistance steel
China TB/T 1979 09CuPCrNi-A corrosion resistance steel
Steel Name:
China TB/T 1979 09CuPCrNi-A Weather Resistant Steel plate, China TB/T 1979 09CuPCrNi-A Weather Resistant Steel Plates, China TB/T 1979 09CuPCrNi-A Weather Resistant Steel Sheets, China TB/T 1979 09CuPCrNi-A Weather Resistant Steel Sheet.
TB/T 1979 09CuPCrNi-A Chemical Composition:
|
Grade |
Chemical Composition (%) |
||||
|
C Max |
Si |
Mn |
P |
S Max |
|
|
China TB/T 1979 09CuPCrNi-A |
0.12 |
0.25-0.75 |
0.20-0.50 |
0.06-0.12 |
0.02 |
TB/T 1979 09CuPCrNi-A Mechanical Property:
|
Grade |
Mechanical Property |
||
|
Yield Strength(MPa) min |
Tensile Strength(MPa) min |
% Elongation min |
|
|
China TB/T 1979 09CuPCrNi-A |
348 |
480 |
24 |
09CuPCrNi-A Main Application:
China TB/T 1979 09CuPCrNi-A Weather Resistant Steel Plate is used in Vehicle, Bridge, Tower, Container and So On.
09CuPCrNi-A steel Additional Condition:
UT (Ultrasonic examination),AR(As Hot Rolled only),TMCP(Thermal Mechanical Control Processing),N(Normalized),Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, HIC test, NDT ,PWHT( Simulated Post Weld Heat Treatment),NACE0175,The Third Party Test (Such as SGS Test), Coated or Shot Blasting and Painting.